Fall Arrest Solutions

Fall Prevention Technologies has extensive expertise and experience to advise you on the correct Fall Arrest solutions for your work at height problem areas. IKAR is a well known brand from Germany and only supplies the best quality products to the market. Our staff has been trained and licensed in Germany to supply, inspect, service and repair IKAR products. German quality tools are used to service and repair the IKAR products. IKAR offers low maintenance products of high quality. Parts can be replaced where necessary, and you don’t necessarily replace the complete fall arrest block. Which is a huge saving to any company. Contact us and we will suggest the correct equipment to use to get the job done.


Fall arrest block / inertia reel / retractable type fall arrester

  • EN360
  • Plastic housing with a galvanised steel cable lifeline.
  • Swivel eye anchor attachment point.
  • Additional testing against falls over edges.
  • Aluminium double action hook on end of lifeline to EN362.

VARIANTS

Lifeline LengthApprox. WeightOrder Code
3m 1.9 Kg HWPS3
4.5m 2.1 Kg HWPS4.5
6m 2.5 Kg HWPS6
9m 3.2 Kg HWPS9
12m 4.9 Kg HWPS12
18m 6.3 Kg HWPS18
24m 7.3 Kg HWPS24

Fall arrest block / inertia reel / retractable type fall arrester

  • EN360
  • Lightweight aluminium housing with a galvanised steel cable lifeline.
  • Swivel eye anchor attachment point.
  • Additional testing against falls over edges.
  • Aluminium double action hook on end of lifeline to EN362.

VARIANTS

Lifeline LengthApprox. WeightOrder Code
4.5m 2.7 Kg HWS4.5
6m 3 Kg HWS6
9m 3.7 Kg HWS9
12m 5.4 Kg HWS12
18m 6.9 Kg HWS18
24m 8.4 Kg HWS24

Fall arrest block / inertia reel / retractable type fall arrester

  • EN360
  • Lightweight aluminium housing with a galvanised steel cable lifeline.
  • Fixed handle anchor attachment point.
  • Aluminium double action hook on end of lifeline to EN362.

VARIANTS

Lifeline LengthApprox. WeightOrder Code
12m 5.9 Kg H12
18m 9.5 Kg H18
28m 13.5 Kg H24
33m 18 Kg H30
24m 27.2 Kg H42
65m 38 Kg H65

Fall arrest block / inertia reel / retractable type fall arrester with auto controlled descent

  • EN360 & EN341
  • Aluminium housing with a galvanised steel cable lifeline.
  • Swivel eye anchorage attachment point.
  • Aluminium double action hook on end of lifeline to EN362.

VARIANTS

Lifeline LengthApprox. WeightOrder Code
9m 5 Kg HAS9

Fall arrest block / inertia reel / retractable type fall arrester, with built in two-way rescue/ recovery mechanism

  • EN360
  • Aluminium housing, with a galvanised steel cable lifeline.
  • With release pin and two-way winding handle, to engage rescue/recovery mode.
  • Fixed handle anchor attachment point.
  • Attachment/connection handle or can be fitted to a davit or tripod via a bracket.
  • Aluminium double action hook on end of lifeline to EN362.


Fall arrest device with rescue lifting and lowering facility, equipped with a recovery mechanism operated by a device mounted handle. After an arrested fall, or if the user becomes incapacitated at the bottom of a shaft, the recovery mechanism can easily be engaged by a second person to raise or lower the person to a place of safety.

The HRA can be anchored directly to a suitable anchorage point via the attachment handle or alternatively can be mounted on a rescue tripod.
The HRA is not suitable for use over a leading edge and has not been edge tested.

VARIANTS

Lifeline LengthApprox. WeightOrder Code
12m 8.3 Kg HRA12
18m 11.5 Kg HRA18
24m 16 Kg HRA24
30m 21 Kg HRA30
42m 40 Kg HRA42
65m 43 Kg HRA65

  • 25mm low stretch water repellent.
  • UV resistant polyester.
  • Webbing with wear indicator.
  • Max 20m up to two persons.
  • Simple to install via ratchet style tensioner.
  • Record style bag keeps equipment protected.
  • Lightweight and portable 1.3kg.
  • Carbon steel zinc plated ratchet.
  • Can be produced in a range of colours.
  • 4000kg webbing.


The HLL1 is a simple to install webbing system that can span between fixed anchorage points and provide a safe horizontal lifeline for up to two users. It comprises of 20m webbing, tensioner and bag as standard.

Gotcha is the original pre-assembled remote rescue kit, designed for rescuing a suspended casualty from fall arrest lanyards, rope safety lines and fall arrest blocks.

The Gotcha kit is designed pre-assembled, and provides rescue for a single casualty, raising or lowering them to the nearest point of safety. The casualty is initially lifted to release their original attachment, eliminating the need for cutting and saving you money. The kit comes complete with an anchor sling, capable of attaching to a wide range of structures, and all terminations are sewed for security.

Made from anodised aluminium and stainless steel, the pack is lightweight and easily portable. The kit is colour coded for simplicity and includes an extension pole for delivery or the optional GRABBA for use with rope safety lines or fall arrest blocks. Gotcha is adaptable for different heights of anchor point, coming in four different sizes:

  • KIT8-50: 17m
  • KIT8-100: 34m
  • KIT8-150: 51m
  • KIT8-200: 68m

A simple to install temporary fibre rope lifeline system that can span between fixed anchorage points and provide a safe horizontal anchorage for up to four users.

The HLL1 system’s configuration allows up to 25m of 16mm rope which comes with a swivel socket to reduce rope twist. It uses a RVT (Rope Vice Tensioner) to tension and lock system. The system can be tightened by hand or additional tension may be applied with a 24mm spanner, the pulley slips when MAX tension is achieved.

  • 11mm Kernmantle Static Rope.
  • Made In South-africa.
  • Static Rope Is Used In The Industrial And Rescue Industries.
  • Outer Made From Polyester And The Core From Nylon.
  • Available In 50m / 100m / 200m Lengths.
  • Breaking Load 22kn.
  • Manufactured to Standard En 1891 : 1998.
  • Rope available in various colours.